• Home

  • Products

    • Local Shipping
    • Tasmota
    • ESPHome
    • WLED
    • Homekit
    • Home Bridge
  • Forum

  • About Shipping

  • Contact Us

  • 更多

    Use tab to navigate through the menu items.
    0
    この動作を確認するには、公開後のサイトへ移動してください。
    • カテゴリー
    • すべての記事
    • マイポスト
    hkasbergen
    1月12日
    最終更新: 1月12日

    Calibration problem power plug

    カテゴリー: Tasmota Related

    I am trying to calibrate my Tasmota EU power plug.

    I corrected 220 volt to 231 volt as measured, that went well.

    But for power and also current, it seems like there is some kind of maximum value/limit involved.

    For power I tried this,


    Measurement = 943 Watt, but max. correction is up to 870 Watt, not higher.

    Measurement = 1850 Watt, but max. correction is up to 1730 Watt, not higher.


    Is there a ceiling for correction or did I overlook something?

    I use cmnd: PowerSet <####.#> , also tried PowerCal ( via MQTT)


    Can you help me with this issue?


    Here is the info about the powerplug,

    Athom Power Monitoring Plug PP01

    Program Version10.1.0(tasmota)

    Build Date & Time2021-12-08T14:47:33

    Core/SDK Version2_7_4_9/2.2.2-dev(38a443e)

    Uptime3T01:04:48

    Flash write Count243 at 0xF5000

    Boot Count14

    Restart ReasonSoftware/System restart

    Friendly Name 1HenkieSwitch

    AP1 SSId (RSSI)SKJL (100%, -50 dBm) 11n

    HostnamePP01-3153

    MAC Address4C:EB:D6:02:4C:51

    IP Address (wifi)192.168.0.173

    Gateway192.168.0.1

    Subnet Mask255.255.255.0

    DNS Server1195.130.131.3

    DNS Server2195.130.130.3

    HTTP APIEnabled

    MQTT Host192.168.0.21

    MQTT Port1883

    MQTT UserDVES_USER

    MQTT ClientDVES_024C51

    MQTT TopicPP01

    MQTT Group Topic 1cmnd/tasmotas/

    MQTT Full Topiccmnd/PP01/

    MQTT Fallback Topiccmnd/DVES_024C51_fb/

    MQTT No RetainDisabled

    EmulationNone ESP

    Chip Id150609 (ESP8266EX)

    Flash Chip Id0x1540A1

    Flash Size2048 kB

    Program Flash Size1024 kB

    Program Size616 kB

    Free Program Space384 kB

    Free Memory26.7 kB


    2件のコメント
    0
    2件のコメント

    ご意見をお寄せくださいコメントを残すにはサインアップしてください。

    Athom_Support
    1月13日

    https://tasmota.github.io/docs/Power-Monitoring-Calibration/

    いいね!
    hkasbergen
    1月17日
    返信先

    Indeed, I followed the procedure discribed here. I also tried first with light bulb of 60 watt. I could correct this perfectly, as it was only minor adjustment. But after that I tried heavy load as discribed before of about 1000 watt and 2000 watt, that didn't work!


    As I intend to use this power plug to monitor the power consumption of my drying machine, I need this heavy load to be correct.


    I just tried directly from console,



    Result is the same, doesn't go higher.


    Does anyone have a solution?

    いいね!
    2件のコメント
    同じような記事
    • Is it possible to calibrate the plug ?
    • Here is an ESPHome config for the UK Power Plug
    • Tasmota EU Plug - problem

    ©2020 by athom.