This product is temporarily prohibited from being shipped to the European Union. Buyers who require shipping to the EU are advised not to place orders. Orders that are placed will be canceled and refunded.
mmWave and PIR Human Presence Sensor
Made For ESPHome
Model：PS01
Input：DC 5V 1A Type-C
Wi-Fi Type：2.4GhzSize：44*22*72mm
Working humidity: 5~95%RH
Operating temperature: 0°C~+40°C
Radar Frequency：24Ghz（ISM)
Features:
- Integrated Luminance Sensor
- Build In CH340C serial chip, you can flash your firmware directly
- Radar sensitivity and detection distance are adjustable.
- The product has human presence, micro-motion, and human motion detection capabilities.
- It can detect the presence or absence of individuals within the designated area and their movements.
GPIO
- Radar Output：GPIO14
- Pir Output：GPIO12
- Radar TX：GPIO15
- Radar RX：GPIO13
- LED：GPIO16
- Button：GPIO0
Simple automation: use Occupancy as a trigger, trigger automation to make your lights turn on
Installation Precautions:
- Choose a suitable installation location away from air conditioners, curtains, fans, plants, etc. to avoid interference.
- Avoid direct beam irradiation on the ground, walls or doors to minimize reflections and indirect detections.
- Configure appropriate detection distance, sensitivity and delay time to reduce interference from objects.
- Keep the sensor surface clean and free from dust and obstacles.
- Ensure the sensor has enough space around it for proper air circulation.
Youtube Reviews:
- Athom Presence Sensor - mmWave + PIR in Home Assistant (IoBroker) in Sekunden eingebunden in ESPHome ( German)
- Comparison video between Screek 2A and Athom mm Wave Sensors
- ESPHome Athom mm Wave Human Presence Sensor is great
- Athom PS01 mmWave / PIR Presence Sensor - Setup, Configuration, Trouble Shooting, Review
mmWave Датчик присутствия человека на ESP8285 в ESPHome и Home Assistant. Athom Presence Sensor (Russian)
Human Presence Sensor
$42.00 通常価格
$29.40セール価格