Pre Flashed WLED WiFi Smart Bulb
Pre configed IOs plug and play
Pre flashed before assembling
Build in ESP32C3 4MB
The default Wi-Fi password is wled1234
If you experience Wi-Fi connection issues, try setting the TX power to maximum (19.5dBm).
When the bulb is not connected to Wi-Fi, it will enter factory test mode by default. You can exit this mode by connecting to Wi-Fi or by disabling the "Indicator Light" option in the Wi-Fi settings and saving the changes.
- Color: RGB+Warm+Cold White
- Color Temperature: 3000-6500K
- Voltage: 110V~250V
- Power: 12W
- Base: E27
- Material: Aluminium+Plastic
- Working Temperature: -25°C~65°C
- Size: 70x70x135 mm
- Wireless: WiFi 802.11/b/g/n
- Certification: CE, RoHS
PWM GPIO
- R:GPIO6
- G:GPIO7
- B:GPIO5
- CW:GPIO4
- WW:GPIO3
The first rule of upgrading: If it ain't broke, don't fix it!
In other words, ensure that there is a good reason to mess with a working installation (e.g., a need to use a new feature or address a found problem fixed in the current version).
Danger:
Open sources firmware has no control of power supply , if you maximum all channel at the same time, it will highly possible damage the bulb and we will not provide warranty in such case.