この動作を確認するには、公開後のサイトへ移動してください。

Flash from HomeKit to WLED

I have two LS-5P(HK) Versions I want to flash with WLED so I can't take advantage of LED Strip Zones.

Does anyone know if/how I do that? I've seen discussions on running a console command for Tasmota that would allow the "upgrade" option via WLED bin file upload but I don't know where to do that from the HK firmware's page. Any help is appreciated.

Thanks!

3件のコメント

Comments（3）

Athom_Support

2022年10月26日

Find the IP address of the device and open it, then upload the wled firmware

https://drive.google.com/drive/folders/1aSmFKDFl2GcmR0icGq4ZR8PlelTTBUNf?usp=sharing

Cosmin Mitu

2022年10月27日

返信先

Hello Athom team, and thank you for the fast reply! I'm guessing we should use the "5pin_RGBW". Can you please advise us on how the input schematics change?

For example I'm using the BTF-LIGHTING RGBW SK6812, very similar to WS2812B but it has an extra white chip. They have a RED (VCC) WHITE (GRD) and GREEN (DATA) cable as well as another set of white and red cables. The LS-5P(HK) has no inputs for that, it has W G B R VCC, so what I'm asking is, after flashing, where does the DATA cable go, and the GROUND? Any advice would be appreciated. Keep up the good work, Athom!

Flash from HomeKit to WLED

Terms of Use

Privacy Policy

Shipping Policy

Return Policy