I just updated the firmware of my "LS-8P Addressable LED Strip Controller (Digital Microphone Built in)" to official WLED_0.15.0_ESP32.bin (sha256: 9943fb09592dab19ff5e482b1a03f284927ddf64af5d74fedac9eea23de5e408).
Now it doesn't boot any more. It seems dead. No relais click. No LEDs light up. The button does not do anything.
Did I use the wrong version? I'm pretty sure I came from WLED_0.14.4_ESP32.bin, so same architecture. I left the SR fork of WLED behind already a year ago.
If I need to flash using a serial adapter, which firmware version should I use? Does the controller have easily accessible pins for flashing?
i Just upgraded mine to 15.1 OTA
I had to use the .bin.gz file
WLED_0.15.1_ESP8266.bin.gz
It lost the Configuration so when it finished Rebooting it came up in AP Mode. (WLED-AP)
These are the steps i did:
Backed up Config
Upgraded to WLED_0.15.1_ESP8266.bin.gz
Rebooted on its own
Came Back as WLED-AP
Clicked WiFi
Joined my WiFi and it came back on My Browser
WLED version 0.15.1
Restored Config
I Changed the AP SSID back to what it was originally
So i Know which open it is if something happens