この動作を確認するには、公開後のサイトへ移動してください。

Human Presence Sensor won't update to latest ESPHome

When I try and do an OTA update of my three Home Presence Sensors to the latest (2024.5.1) version of ESPHome, I get the error message that there is not enough space on the device for the update. Is there a solution to this or are they basically at the end of their updateable life?

4件のコメント

Comments（4）

この投稿へのコメントは利用できなくなりました。詳細はサイト所有者にお問い合わせください。

Athom_Support

2024年5月22日

https://github.com/athom-tech/athom-configs/issues/59

George Van Wagner

2024年5月25日

返信先

Thanks! Appears to have solved the problem, but we'll know for sure at the next ESPHome update.

Douwe Houvast

2024年5月26日

返信先

FYI: it wasn't solved in ESPHome 5.3:

INFO ESPHome 2024.5.3 INFO Reading configuration /config/esphome/athom-presence-sensor-9ce88a.yaml... INFO Detected timezone 'Europe/Amsterdam' INFO Generating C++ source... INFO Compiling app... Processing athom-presence-sensor-9ce88a (board: esp8285; framework: arduino; platform: platformio/espressif8266@4.2.1) -------------------------------------------------------------------------------- HARDWARE: ESP8266 80MHz, 80KB RAM, 1MB Flash Dependency Graph |-- ESPAsyncTCP-esphome @ 2.0.0 |-- ESPAsyncWebServer-esphome @ 3.2.0 |-- DNSServer @ 1.1.1 |-- ESP8266WiFi @ 1.0 |-- ESP8266mDNS @ 1.2 |-- noise-c @ 0.1.4 |-- Wire @ 1.0 |-- ArduinoJson @ 6.18.5 RAM: [===== ] 49.1% (used 40240 bytes from 81920 bytes) Flash: [====== ] 59.4% (used 608169 bytes from 1023984 bytes) ========================= [SUCCESS] Took 1.83 seconds ========================= INFO Successfully compiled program. INFO Connecting to 192.168.1.74 INFO Uploading /data/build/athom-presence-sensor-9ce88a/.pioenvs/athom-presence-sensor-9ce88a/firmware.bin (612320 bytes) INFO Compressed to 414897 bytes ERROR Error binary size: Error: ESP does not have enough space to store OTA file. Please try flashing a minimal firmware (remove everything except ota)

airbag888

2024年10月17日

返信先

I'm getting this error now... so unsolved